The NC326m is a dual port Gigabit Ethernet server adapter for the c-Class BladeSystem. The x4 PCI Express NC326m adapter is supported on all ProLiant c-Class servers in all mezzanine slots. Multiple adapters can be installed per server. The NC326m is designed for applications requiring additional Gigabit Ethernet ports than those provided on the server. It is ideal for virtualization, security, server consolidation, network segmentation, and other BladeSystem applications requiring additional network port density. Tested and proven to meet demanding BladeSystem standards, the NC326m ships with the advanced server features that ProLiant customers have come to expect, such as support for failover and load balancing, TCP/IP checksum offloading, large send offloading, Wake-on-LAN, PXE, jumbo frames, VLAN tagging, QoS, and more.
Dual Gigabit Ethernet ports, Supported on all ProLiant c-Class servers in all mezzanine slots, multiple cards per server, Designed with server needs in mind, IEEE 802.1p, 802.1Q, 802.3, 802.3ad, and 802.3x, ProLiant Teaming including Network Fault Tolerance, Transmit Load Balancing, and Switch-Assisted Load Balancing, 9K industry standard jumbo frames, TCP/IP checksum offload (TCO) and large send offload (LSO), Interrupt coalescence and Dual address cycles (DAC), Wake-on-LAN (WOL), Pre-boot execution environment (PXE), IPv6 packet transmit and receive (excluding all offload capabilities); IPv6 aware SNMPv1 agent for Windows.
HP ProLiant BL685c G6, HP ProLiant BL685c G5, HP ProLiant BL680c G5, HP ProLiant BL495c G6, HP ProLiant BL495c G5, HP ProLiant BL490c G7, HP ProLiant BL490c G6, HP ProLiant BL465c G6, HP ProLiant BL465c G5, HP ProLiant BL460c G6, HP ProLiant BL460c G5, HP ProLiant BL460c, HP ProLiant BL280c G6, HP ProLiant BL260c G5, HP ProLiant BL2x220c G6, HP ProLiant BL2x220c G5.
2,000 Mbps per port full duplex (4,000 Mbps full duplex, both ports) transfer rate delivers outstanding network performance that improves response time and removes bottlenecks across the entire network.
The NC326m support for jumbo frames (also known as extended frames) permit an industry standard 9K byte transmission unit (MTU), which is six times the size of standard 1500 byte Ethernet frame. The NC326m supports jumbo frames as a way to achieve higher throughput and better CPU utilization. Jumbo frames are particularly useful for database transfers and tape backups.
IEEE 802.1Q virtual local area network (VLAN) protocol allows each physical port of the NC326m to be separated into multiple virtual NICs for added network segmentation and enhanced security and performance. VLANs increase security by isolating traffic between users. Limiting the broadcast traffic to within the same VLAN domain also improves performance. IEEE quality of service (QoS) 802.1p tagging allows the adapter to mark or tag frames with a priority level across a QoS-aware network for improved traffic flow.
For overall improved system response, the NC326m supports standard TCP/IP offloading techniques including:
- TCP/IP checksum offload (TCO) moves the TCP and IP checksum offloading from the CPU to the network adapter. - Large send offload (LSO) or TCP segmentation offload (TSO) allows the TCP segmentation to be handled by the adapter rather than the CPU.
Interrupt coalescing (interrupt moderation) groups multiple packets, thereby reducing the number of interrupts sent to the host. This process optimizes host efficiency, leaving the CPU available for other duties.
Dual address cycles (DAC) provide the ability to address memory above 4 GB and improve system performance by preventing the server operating system from performing a buffer copy from below 4 GB to above 4 GB
The two ports on the NC326m are transmitted to separate enclosure interconnect bays providing redundant signal paths
With multiple dual port adapters supported per server connected to up to two redundant pairs of interconnect modules per enclosure, a very wide variety of high availability I/O configurations are possible.
ProLiant Network Adapter Teaming provides fault tolerance and load balancing across a team of two or more network adapters. The team of adapters works together as a single virtual adapter. Support for several different types of teaming is included. Teaming offers IT professionals an easy, efficient, and cost-effective way to provide network fault tolerance and increased network bandwidth.
All hardware is covered by our 3 Year Intelligent Servers Warranty Program. We serial number track ever single piece of hardware and sub-level component. If you have any failures or problems with what you've ordered please call 0800 612 8711 and request our RMA department who will handle any issues and arrange a replacement if the piece of hardware or component is still within the 3 year warranty period from the date the original order shipped.